Mitsubishi FX3U User Manual page 127

FX -16CCL-M User's Manual
3U
BFM No.
SB No.
Hex. Dec. Bit
SB0075 5E7H 1511 b5
SB0076 5E7H 1511 b6
SB0078 5E7H 1511 b8
SB007C 5E7H 1511 b12
SB0080 5E8H 1512 b0
SB0081 5E8H 1512 b1
SB0082 5E8H 1512 b2
SB0083 5E8H 1512 b3
SB0094 5E9H 1513 b4
SB0185 5F8H 1528 b5
SB0186 5F8H 1528 b6
*1. The other station data link status takes up to 6 seconds to turn on after a slave station connected to
the master station becomes faulty. The time to turn ON differs according to the system configuration,
faulty status or other conditions.
Name
Indicates the error invalid station specification status by
parameter.
Error invalid station
OFF: Not specified
specification status
ON : Specified
(The error code is stored in SW0078.)
Indicates the temporary error invalid station specification
Temporary error invalid status.
station specification OFF: Not specified
status ON : Specified
(The error code is stored in SW007C.)
Detects change in the setting switches in the master station
Switch change status in during data link.
master station OFF: No change
ON : Change
Slave station refresh/ Indicates the parameter-set slave station refresh/compulsory
compulsory clear clear setting status in case of programmable controller CPU.
setting status in case of STOP.
programmable OFF: Refresh
controller CPU STOP ON : Clears compulsorily
Indicates the data link status with remote stations and
intelligent device stations.
Data link status in other
OFF: All stations are normal
*1
stations
ON : Some stations are faulty
(The error code is stored in SW0080.)
Indicates the watchdog timer error occurrence status in other
stations.
Watchdog timer error
OFF: No error
status in other stations
ON : Error
(The error code is stored in SW0084.)
Indicates the fuse blowout occurrence status in other
stations.
Fuse blowout status in
OFF: No error
other stations
ON : Error
(The error code is stored in SW0088.)
Detects change in the setting switches in other stations
during data link.
Switch change status in
OFF: No change
other stations
ON : Change
(The error code is stored in SW008C.)
Indicates whether a transient transmission error has occurred
in other stations
Other stations transient
OFF: No error
transmission status
ON : Error
(The error code is stored in SW0094.)
Indicates the accept status of Transmission speed test
Transmission speed request.
test accept status OFF: Not accepted
ON : Accepted
Indicates the completion status of the transmission speed
Transmission speed test.
test completion status OFF: Not completed
ON : Test complete
10.12 Link special relay/Link special register (SB/SW)
Description
10 Buffer Memory
1
Applicability
( : Applicable,
R/W
: Not applicable)
Online Offline
2
R/O
R/O
3
R/O
4
R/O
R/O
5
R/O
6
R/O
R/O
7
R/O
8
R/O
R/O
9
10
121