Mitsubishi FX3U User Manual page 21

FX -16CCL-M User's Manual
3U
Generic name or abbreviation
Remote net additional mode
Ver. 1 compatible slave station
Ver. 2 compatible slave station
SB
SW
RX
RY
RWw
RWr
Peripheral unit
Peripheral unit
Programming tool
Programming tool
Programming software
GX Works2
GX Developer
Handy programming panel (HPP)
Indicator
GOT1000 series
GOT-900 series
GOT-A900 series
GOT-F900 series
ET-940 series
Manual
FX Hardware Edition
3G
FX Hardware Edition
3U
FX Hardware Edition
3UC
Programming manual
Communication control Edition
Analog control Edition
Positioning control Edition
Select this mode when adding a Ver. 2 compatible station to the existing system to increase the
number of cyclic points.
Slave station compatible with the remote net Ver. 1 mode.
Slave station compatible with the remote net Ver. 2 mode.
Link special relay (for CC-Link).
1-bit information which indicates the operation status and the data link status of the master station.
Link special register (for CC-Link).
16-bit information which indicates the operation status and the data link status of the master station.
Remote input (for CC-Link) 1-bit information input from a slave station to the master station.
Remote output (for CC-Link) 1-bit information output from the master station to a slave station.
Remote register (write area for CC-Link) 16-bit information output from the master station to a slave
station.
Remote register (read area for CC-Link) 16-bit information input from a slave station to the master
station.
Generic name for programming software, handy programming panel, and indicator
Generic name for programming software and handy programming panel
Generic name for programming software
Abbreviation of programming software packages SW DNC-GXW2-J/SW DNC-GXW2-E
Abbreviation of programming software packages SW D5C-GPPW-J/SW D5C-GPPW-E
Generic name for FX-30P and FX-20P(-E)
Generic name for GT15, GT11 and GT10
Generic name for GOT-A900 series and GOT-F900 series
Generic name for GOT-A900 series
Generic name for GOT-F900 series
Generic name for ET-940 series
Only manuals in Japanese are available for these products
Abbreviation of FX Series User's Manual - Hardware Edition
3G
Abbreviation of FX Series User's Manual - Hardware Edition
3U
Abbreviation of FX Series User's Manual - Hardware Edition
3UC
Abbreviation of FX /FX /FX
3G 3U
Edition
Abbreviation of FX Series User's Manual - Data Communication Edition
Abbreviation of FX /FX /FX
3G 3U
Abbreviation of FX /FX /FX
3G 3U
Generic Names and Abbreviations Used in the Manual
Description
Series Programming Manual - Basic and Applied Instructions
3UC
Series User's Manual - Analog Control Edition
3UC
Series User's Manual - Positioning Control Edition
3UC
15