T-Shaped Branch Connection Using Cc-Link Dedicated Cables - Mitsubishi FX3U User Manual

FX -16CCL-M User's Manual
3U
5.2.2

T-shaped Branch Connection Using CC-Link Dedicated Cables

This subsection describes the T-shaped branch connection using CC-Link dedicated cables.
1. System configuration with T-shaped branch connection
The figure below shows the system configuration with T-shaped branch connection.
Remote I/O station
or remote device
station
Terminal
resistor
*The number of branch lines is determined by each branch line length and the total branch line length.
38
(Main line)
Remote I/O station
Master
or remote device
station
(Branch line)
(Branch line)
Remote I/O station
or remote device
station
Intelligent device
Remote I/O station
or remote device
station
Remote I/O station
or remote device
station
Up to 6 units can be
connected.
T-shaped branch
terminal block or
connector
station
(Branch line)
station
Remote I/O station
or remote device
station
5.2 CC-Link Wiring
Intelligent device
station
Terminal
(Branch line)
resistor
Remote I/O station
or remote device
station
Remote I/O station
Intelligent device
or remote device
station
station
Up to 6 units can be
connected.
5 Wiring