Mitsubishi FX3U User Manual page 133

FX -16CCL-M User's Manual
3U
BFM No.
SW No.
Hex. Dec.
CC-Link ver. loading/
SW0144 744H 1860 parameter consistency
status
SW0148 748H 1864 Parameter mode
SW0149 749H 1865 Master parameter mode
Transmission
SW0183 783H 1923
test result
Transmission
SW0184 784H 1924 test
station
Name
Stores the CC-Link version matching status of the parameters and
remote device stations/intelligent device stations.
0: Normal
1: Consistency error
Example of consistency error
Loading
Ver. 2 compatible remote
device station
Ver. 1 compatible remote
device station
b15b14 b13b12 to b3 b2
16 15 14 13 to
SW0144
Numbers 1 to 16 above indicate station numbers.
(Bits corresponding to as many as the number of occupied stations
are set to ON.)
Reserved stations and any station of the number higher than the
max. are excepted.
Indicates in which mode the system is operating.
0: Remote net ver. 1 mode
1: Remote net additional mode
2: Remote net ver. 2 mode
When all the stations are faulty, parameter mode is 0.
Indicates in which mode the master is operating.
0: Remote net ver. 1 mode
1: Remote net additional mode
2: Remote net ver. 2 mode
Indicates the execution result of the transmission speed test.
speed
0: Normal
Other than 0: Stores the error code (Refer to Section 16.3.).
Indicates transmission rate speed test results by station numbers.
0: Normal
(Same transmission speed as that of master station, or no
response from the unit.)
1: Abnormal
speed
(Different transmission speed from that of master station.)
result for each
b15b14b13b12 to b3 b2
16 15 14 13 to
SW0184
Numbers 1 to 16 above indicate station numbers.
(Only the bit corresponding to the head station number is set to
ON.)
10.12 Link special relay/Link special register (SB/SW)
Description
Parameter
Ver. 1 compatible remote
device station
Ver. 2 compatible remote
device station
b1 b0
4 3 2 1
b1 b0
4 3 2 1
10 Buffer Memory
1
Applicability
( : Applicable,
R/W
: Not applicable)
Online Offline
2
3
R/O
4
R/O
5
R/O
R/O
6
R/O
7
8
9
10
127