Sharp MX-B350W User Manual page 237

SYSTEM SETTINGS►PURPOSE OF THE SYSTEM SETTINGS
Use the numeric keys to enter the five-digit administrator PIN code.
4
• If this is the first time you are programming the administrator PIN code, enter the factory default code. (Refer to the
Start Guide)
• " " appears for each digit that you enter.
• The special modes screen will appear with "Change Admin PIN" selected.
Press the [OK] key.
5
The administrator PIN code change screen appears.
6
Press the [OK] key.
7
• The previously programmed administrator PIN code is replaced by the new administrator PIN code.
• Press the [CA] key to return to the base screen.
Enter the new 5-digit administrator PIN code with the
PIN
numeric keys.
Any 5 digits can be used for the administrator PIN code.
7-3