Sharp MX-B350W User Manual page 192

SCANNER►SCANNER SEQUENCE
Select the destination selection method.
8
► SELECTING A DESTINATION (USING THE [ADDRESS] KEY) (page 5-8)
Select from the following three destination selection methods:
• Address book (page 5-8)
Select one of the stored destinations directly from the operation panel.
• Address entry (page 5-9)
Directly enter the e-mail address. (Only for Scan to E-mail.)
• Address search (page 5-9)
Access a directory data base on the Internet or your intranet and search for a destination e-mail address.
During a global address search, multiple addresses can be entered to perform a broadcast transmission.
When you have finished searching for the destination, you will return to the following base screen.
• Information on the destination can be stored in the Web page.
• The sender name is normally set to the name stored in "Reply E-mail Address" in "SMTP Setup" in the Web page.
Press the [START] key.
9
Scanning begins.
If scanning is completed normally, the following screen is appears briefly and then the display returns to the
base screen.
Canceling transmission
► Canceling transmission (page 5-8)
• If a misfeed occurs during scanning in scan mode, scanning will be canceled and the data scanned will be deleted.
Remove the misfed original and reload the originals from the beginning.
Using the document glass
Make sure the machine is in scan mode.
1
When the SCAN indicator is lit, the machine is in scan mode. If the indicator is not lit, press the [SCAN] key.
If auditing mode has been enabled for the scan function in the system settings, a message will appear prompting you to
enter your account number when you switch to scan mode. Enter your account number (five digits) with the numeric
keys.
► User Authentication (page 7-12)
2
Place the original.
Place the original on the document glass.
DOCUMENT GLASS (page 1-32)
5-6