Sharp MX-B350W User Manual page 211

SCANNER►SAVING IN USB MEMORY DEVICE
5
If a USB flash memory is inserted into the machine prior to step 4, the following screen will appear.
Instead of performing steps 3 and 4, you can select "Scan to the memory device" with the [
screen and press the [OK] key to select theUSB flash memory as the destination.
Press the [START] key.
6
Scanning begins.
If scanning is completed normally, "Complete." is appears briefly and then the display returns to the base screen.
Using the document glass
Make sure the machine is in scan mode.
1
When the SCAN indicator is lit, the machine is in scan mode. If the indicator is not lit, press the [SCAN] key.
If auditing mode has been enabled for the scan function in the system settings, a message will appear prompting you to
enter your account number when you switch to scan mode. Enter your account number (five digits) with the numeric
keys.
► User Authentication (page 7-12)
2
You cannot place originals in both the document feeder tray and on the document glass and send them in a single
transmission.
Connect the USB flash memory to the
machine.
Place the original.
Place the original on the document glass.
► DOCUMENT GLASS (page 1-32)
5-25
] or [ ] key in the above