Sharp MX-B350W User Manual page 208

SCANNER►SCANNING FROM YOUR COMPUTER (PC SCAN)
Scanner driver settings
The scanner driver setup screen consists of the "Set-up screen", which lets you select scan settings, and the "Preview
screen", which shows the scanned image. For details on the scan settings, click the "Help" button in the preview screen
to display Help.
Set-up screen
(1) "Scanning Position" menu
("Scanning Source" in some regions)
Select the location where the original is placed.
Selections are "Platen" (document glass), "SPF
(Simplex)", "SPF (Duplex-Book)" or "SPF
(Duplex-Tablet)".
► SCANNING FROM A TWAIN-COMPLIANT
APPLICATION (page 5-20)
(2) "Scanning Mode" menu
Select "Preset" or "Custom Settings" ("Standard" or
"Professional" in some regions) for the scanning mode.
The "Preset (or Standard)" screen lets you select the
original type as well as monitor, photo, fax, or OCR
according to the purpose of scanning.
If you wish to change the default settings for these four
buttons, or select custom settings such as the image type
and resolution before scanning, switch to the "Custom
Settings (or Professional)" screen.
For details on the settings, click the "Help" button in the
preview screen to display Help.
(3) "Image Area" menu
Set the scanning area. To scan the original size detected
by the machine, select "Auto".
The scanning area can also be specified as desired in
the preview window.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
5-22
(4) "Zoom Preview" checkbox
When this is selected, the selected part of the preview
image will be enlarged when the "Preview" button is
clicked.
To return to the regular view, remove the checkmark.
[Zoom Preview] cannot be used when [SPF] is selected
in the "Scanning Position" menu.
(5) "Preview" button
Previews the document.
If [Preview] is canceled by immediately pressing the [Esc]
key on your keyboard, nothing will appear in the preview
screen.
(6) "Scan" button
("Scanning" in some regions)
Click to scan an original using the selected settings.
Before clicking the "Scan" button, make sure the settings
are correct.
To cancel a scanning job after the "Scan" button is
clicked, press the [Esc] key on your keyboard.
(7) "Close" button
Click to close the scanner driver setup screen.