How To Select The Resolution - Sharp MX-B350W User Manual

FACSIMILE►BASIC TRANSMISSION METHODS

HOW TO SELECT THE RESOLUTION

The resolution can be changed to match the text size of the original, and the original type, such as a photo. Select
"Resolution" in the right menu of the base screen of fax mode and press the [OK] key.
Standard
Select for an original with normal size text.
Select for an original with small text or detailed diagrams. The original will be scanned at twice the density
Fine
of "Standard".
Select for an original with intricate pictures or diagrams. A higher-quality image will be produced than with
Super Fine
the "Fine" setting.
Fine / Halftone Use for photo or shaded color originals (color documents, etc.). Transmits a clearer image than with "Fine"
or "Super Fine" alone.
Super Fine /
The transmission time is slightly longer when halftone is selected.
Halftone
• The factory default settings for the resolution and contrast are "Standard" and "Auto", respectively.
The default settings for the resolution and contrast can be changed in the system settings
When using the document glass to scan multiple original pages, you can change the resolution and contrast each time you
change pages. When using the auto document feeder, you cannot change the resolution and contrast after scanning has
started.
• Even if you send a fax at "Fine" or "Super Fine", the receiving fax may not be capable of receiving and printing the fax at
that resolution.
• To cancel a resolution setting, press the [CA] key.
4-19
Set Res. Con. (page 7-20).