Sharp MX-B350W User Manual page 184

FACSIMILE►OTHER FUNCTIONS
Sending result
ERRORXXXXXX
First two digits
Last four digits
XX-XX OK
Reception result
OK
P. FAIL
MEMORY FULL
LENGTH OVER
NO RX ROLL
RX NO POLL
ERRORXXXXXX
First two digits
Last four digits
XX-XX OK
JUNK FAX ERR
Line conditions prevented the transmission from taking place normally.
A code used by service technicians appears.
When group dialing or broadcast transmission was performed,
xxx- : Indicates total number of transmissions.
xxx OK: Indicates completed transmissions.
Reception was completed successfully
The power was turned off or a power failure occurred.
The image memory became full during substitute reception to memory.
The transmitted document was over 800 mm long and therefore could not be received.
When polling was attempted,
Your fax number (sender's number) was not programmed in your machine.
Your fax number was not programmed as a polling passcode number in the other machine.
When polling was attempted,
The other machine did not have a polling function.
The other machine did not have a document stored in polling memory.
Line conditions prevented the reception from taking place normally.
A code used by service technicians appears.
When serial polling ended normally,
xxx- : Indicates total number of transmissions.
xxx OK: Indicates completed transmissions.
Fax reception was denied by the reception denial function.
4-59
Explanation
Explanation