Sharp MX-B350W User Manual page 9

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
(18) (19) (20)
(18) [COMM. SETTING] key
This is used to switch between memory
transmission and direct transmission, and to switch
between automatic reception and manual
reception.
► Transmission settings (memory transmission mode
and direct transmission mode) (page 4-15)
(19) [SPEED] key
This is used to dial by Speed dialing.
► TRANSMISSION BY AUTO-DIALING (SPEED
DIALING AND GROUP DIALING) (page
(20) [FAX STATUS] key
This is used to cancel a fax transmission or a stored fax
transmission.
► CANCELING A FAX TRANSMISSION (page 4-21)
(21) Data notification indicator
The indicator lights solidly or blinks to indicate the status
of a job.
(22) [ADDRESS] key
Used to search for address, numbers and other contact
information stored for auto dialing.
► SEARCHING FOR A PROGRAMMED
DESTINATION (USING THE [ADDRESS] KEY)
(page 4-13)
(23) [BACK] key
Press to return the display to the previous screen.
(24) [LOGOUT] key
Press this key to log out after you have logged in and
used the machine. When using the fax function, this key
can also be pressed to send tone signals on a pulse dial
line.
(25) Error indicator
Lights solidly or blinks to indicate the status of the error.
(21)
(22) (23)
(26) (27) (28)
4-12))
(25)
(24)
(29)
(30) (31)
(26) [SPEAKER] key
This is used to dial without lifting an extension phone
connected to the machine.
(27) [REDIAL/PAUSE] key
This is used to redial the last number dialed, and enter a
pause when entering a fax number.
► CONVENIENT DIALING METHODS
(AUTO-DIALING) (page
(28) [DUPLEX] key
Select the duplex copy/fax/scan mode.
(29) Printer mode indicator
• DATA indicator
Blinks when print data is being received. Lights
steadily during printing.
(30) FAX mode indicators
• LINE indicator
Lights up when a fax is being sent or received.
• DATA indicator
Blinks when a fax cannot be printed because there is
no paper or otherwise. Lights steadily when there is an
unsent fax.
(31) [READ-END] key
When copying in sort mode from the document glass,
press this key when you have finished scanning the
original pages and are ready to start copying.
1-6
(page 4-16)
4-6),