Changing The Resolution; Sending An Image In Scan Mode - Sharp MX-M850 Quick Start Manual

CHANGING THE RESOLUTION

You can select the resolution as appropriate for the original type.

Sending an image in scan mode

This section explains how to set the resolution to "300X300dpi", which creates a clearer image than the default
resolution.
The side to be scanned
must be face up!
(2)
Scan Internet Fax
Address Book
Original
Address Entry
Exposure
(1)
Send Settings Resolution
(3)
Address Review File Format
Colour Mode
File
Special Modes
Quick File
Scan/Resolution
78
Downloaded From ManualsPrinter.com Manuals
Fax Data Entry USB Mem. Scan
Scan: Auto Send: Auto
A4
Auto Text
200X200dpi
PDF PDF
Auto/Greyscale
OK
(5)
100X100dpi
200X200dpi
300X300dpi
(4)
400X400dpi
600X600dpi
1
Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
2
Select settings in the touch panel.
(1) Specify the destination.
For the procedures for specifying a destination, see
"CONVENIENT TRANSMISSION METHODS" (page
72).
(2) Make sure that the desired mode ([Scan] tab)
is selected.
(3) Touch the [Resolution] key.
(4) Touch the [300X300dpi] key.
(5) Touch the [OK] key.
3
Press the [START] key.
Cancel scanning