Transmitting An Image; Sending An Image In Scan Mode - Sharp MX-7090N User Manual

SCANNER►TRANSMITTING AN IMAGE

TRANSMITTING AN IMAGE

TRANSMITTING AN IMAGE

SENDING AN IMAGE IN SCAN MODE

An image can be sent in scan mode (Scan to E-mail, Scan to FTP, and Scan to Network Folder).
• If the memory becomes full while the originals are being scanned, a message will appear and scanning will stop.
• When performing Scan to E-mail, take care not to send a file that is too large. In particular, multi-page files tend to be large.
When sending a multi-page file or other large file, it may be necessary to reduce the number of scanned pages or reduce
the send size.
Do not place any objects under the original size detector. Closing the automatic document feeder with an object underneath
may damage the original size detector plate and prevent correct detection of the document size.
Place the original.
1
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-90)
► DOCUMENT GLASS (page 1-92)
• When placing the originals, orient them as shown below.
Originals
Portrait orientation*
1
Landscape orientation*
1
*To place a large portrait-oriented original, place it as shown in the figure titled "Landscape orientation" and specify the
placement orientation in step 4.
• Place 5-1/2" x 8-1/2" (A5) size originals in portrait (vertical) orientation (
orientation (
manually.
Document feeder tray
Place the original face up.
ABC
), an incorrect size will be detected. For an 5-1/2" x 8-1/2"R (A5R) size original, enter the original size
Place the original face down and align the
corner with the tip of the
corner of the document glass scale.
). If placed in landscape (horizontal)
4-28
Document glass
mark in the top left
C B A