Projector Safe Attachment Points; Throw Distance - Barco F70 Series User Manual

Physical Installation

4.6 Projector safe attachment points

About
Due to use of a Rigging Frame or other equipment, the projector has some defines anchor points that shall be
used. See the illustration below.
Note that there is only this 4 selected attachment points that is approved as anchor points for the unit.
Image 4-3
Item
1

4.7 Throw distance

Calculate the installation throw distance
Throw is the distance (D) measured from your projector lens to the screen. To calculate the throw distance for
an installation, you will need two pieces of data: the selected lens throw ratio (L) and the horizontal width (W)
of the screen. For example, if the screen width (W) is 2.4 meters and the projector lens has a throw ratio (L) of
0.99:1, then the throw distance (D) will be 2.38 meters.
Calculation: 2.4 x 0.99 = 2.38
52 601–426-03 F70 Series
Anchorpoints.
For attaching to rigging frame or similar.
Thread Dimension
M6
1
Max Hole Depth
15mm
Application
Anchorpoint / Ceiling / Rig
Mount