Barco F70 Series User Manual page 97

Image 8-21: Bow distortion
Symmetric bow correction
1. In the main menu, select Installation → Warp.
Image 8-22: Installation menu, Warp
2. In the Warp menu, select Bow.
Image 8-23: Warp menu, Bow
A check symbol at the bottom right corner indicates that the bow function is activated.
3. To enable Bow correction, make sure the Bow slider is set to On.
The slider is enabled when set to the right and when it is highlighted blue.
Installation menu
601–426-03 F70 Series 97