To set a value:
•
Press OK to select or deselect a checkbox (turn a function ON or OFF).
•
Use the arrow keys to move the barscale slider up or down on the value line. For a barscale 0-9, each step
will equal 10% of the total value.
•
To enter the value as a direct number, press ENTER, input the digit(s), and then Press ENTER again to
execute and exit cursor mode e.g. ENTER 79 ENTER.
Changes to values are implemented dynamically.
Menu memory
The OSD menu remembers the last selected sub–item as long as the projector is running. The menu memory
is reset when restarting the projector from standby.
Getting started
601–426-03
F70 Series
67