Projector Source And Control Connections; Making Connections; Connector Specifications; Dvi-I - Barco F70 Series User Manual

Getting started

5.1 Projector source and control connections

Overview
•

Making connections

•

Connector specifications

•
Control interfaces
5.1.1 Making connections
The source switching time varies from 0.5 to 5 seconds.
Source signal connectivity
The connector panel at the back of the projector is used for all source connections.
Source signal connectivity on the projector is:
• 2x Dual Link DVI-I (DVI-D functionality)
• 2x DisplayPort 1.2
• 1x HDMI 2.0
• 1x HDBaseT
• 1x 3G SDI
5.1.2 Connector specifications
Overview
•

DVI-I

•
Display Port 1.2
•
HDMI 2.0
•
3G-SDI
•
HDBase T
5.1.2.1 DVI-I
Specifications
Parameter
Connector
Signal characteristics
Max. cable length
Max. pixel rate
Scan format
Max. input data resolution
Bit depth
EDID
HDCP
60 601–426-03 F70 Series
Value
DVI-I female digital RGB
DVI 1.0, Digital, TMDS
25 m (24 AWG)
330 MHz (dual link), 165 Mhz (single link)
Progressive
1920x1200 60Hz (Single link), 2560x1600 60Hz
(Dual Link).1920x2400 @60Hz
8 bit
Supported
Supported