Ir / Night Vision Functionality - Barco F70 Series User Manual

Installation menu

8.1 IR / Night vision functionality

About
IR / Night Vision functionality is only available for the FS variant of the projector..
In combination with Night Vision Goggles (NVG), this will give a realistic rendering of the environment. This
will visualize in a realistic way, night time, dusk and dawn, and limited visibility scenarios.
The IR light source has a wavelength of 740nm
How to enable IR/Night Vision.
Enter the menu Home / Installation / Display setup and select NightVision in the scroll down menu.
Image 8-1
To set up the IR illumination, enter the menu Home/Installation/Illumination/Power. This menu shows two
sliders; one for the Laser, and one for the IR LED. The sliders are scaled from zero – 100% power.
88 601–426-03 F70 Series