How to enable the ECO mode
1.
In the main menu, select System Settings →Standby ECO.
Image 9-2: System Settings Menu — Standby ECO
2.
To enable the ECO mode, make sure the slider is set to On. The slider is enabled when set to the right and
when it is colored blue.
How to disable the ECO mode
1.
In the main menu, select System Settings →Standby ECO.
Image 9-3
2.
To disable the ECO mode, make sure the slider is set to Off. The slider is disabled when set to the left and
when it becomes grey.
9.4 Service
About
System settings / Service
The Service Menu is for service personnel and / or advanced users only.
See the Service Manual for detailed information regarding service issues.
The menu is password protected.
9.5 Reset
What can be done?
All settings and values on the projector can be reset to its default values. This can be done for one or more
settings separately, or all settings together (factory reset).
Default settings
The following settings are default settings:
UserInterface
Network
System
Screen
Optics
Setting
Theme
Communication
Eco Mode (if applicable)
Screen luminance - Unit
High Contrast
System settings menu
Default value
Light
LAN, Automatic settings
Available
nits
Off
601–426-03
F70 Series
113