Approved Lenses; Lens Range - Barco F70 Series User Manual

Lenses

3.1 Approved Lenses

Approved Lenses
Partnumber
R9801214
R9801218
R9801228
R9801209
R9801225
R9801249
R9801216
R9801226
R9801230
R9801211
R9801220
R9801221
R9801295
PN_EN58
This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than
4.7 is installed. For Northern America, installation requirements according to Risk group 3 (RG3) must be
followed when interchangeable lens with throw ratio greater than 2.5 is installed.
Refer to the manual chapter 1.7 for the throw ratio versus hazard distance before operation.

3.2 Lens range

CAUTION: Always remove the lens from the lens holder before moving or transporting the
projector. Failure to do this may cause damage to the lens holder and prism.
Available lenses — WUXGA
The FLD lens range is custom-engineered for WUXGA and 1080 projectors.
The electrical connection to the lens motors is via a spring probe contact (pogo) pin array on the bayonet
mount.
The projector will automatically detect and identify the lens when it is installed. Automatic detection is not
available for 3rd party lenses.
40 601–426-03 F70 Series
Description
FLD 1.6 - 2.32 : 1 (EN11)
FLD 0.74 : 1 (EN12)
FLD 1.24 - 1.6 : 1 (EN13) approved
FLD 2.37 - 3.79 : 1 (EN14) approved – professional
FLD 1:16 : 1 (EN15)
FLD 3.8 - 6.5 : 1 (EN16)
FLD+ 1.7 - 2.5 : 1 (EN41) approved
FLD+ 0.8 : 1 (EN42)
FLD+ 1.2 - 1.7 : 1 (EN43) approved
FLD+ 2.5 - 4.6 : 1 (EN44) approved – professional
FLD+ Long Focus 0.8 -
1.21 : 1 (EN45)
FLD+ Short Focus 0.8 -
1.21 : 1 (EN46)
FLD+ 0.65 : 1 (EN47)
FLD+ 0.28 : 1 (EN58)
For North Amrica
approved
approved
use only
approved
approved – professional
use only
approved
use only
approved
approved
approved
approved
Outside North america
approved
approved
approved
approved – professional
use only
approved
approved – professional
use only
approved
approved
approved
approved – professional
use only
approved
approved
approved
approved