CHAPTER 1
WELCOME
control.
Status light
The status light blinks green and red when it registers a button being pressed on the remote
control.
When the status light is red, the display is in a low power state. To wake the display, press the
Power button
on the front control panel or POWER on the remote control.
Ambient light sensor
The ambient light sensor can detect the room brightness and adjust the display's brightness. Make
sure Auto is enabled in Brightness and volume in the display's settings. See SMART Board MX
series interactive displays installation and maintenance guide (smarttech.com/kb/171257).
Internal speakers
The display includes two 10 W rms integrated speakers. You can also connect external speakers.
Accessories
Accessories for the display include the following:
SBA-100 projection audio system
l
SMART Audio 400 classroom amplification system
l
USB extenders
l
SBA-100 projection audio system
The SBA-100 projection audio system consists of two 14 W speakers and is
intended for wall-mounted displays. You can control volume using the
display's front control panel or the digital volume controls in a connected
computer's operating system.
For more information, see the SBA-100 projection audio system specifications
(smarttech.com/kb/171146).
6
smarttech.com/kb/171284