Convenience Panel; Proximity Sensor; Ambient Light Sensor - SMART Board 6075S Installation And Maintenance Manual

Chapter 1
Welcome

Convenience panel

Proximity sensor

The proximity sensor is located in the top-left corner of the display's frame.
The proximity sensor can detect people up to 16' (5 m) away when the display is in
Standby mode.
When the proximity sensor detects people in the room, the display turns on or
enters ready mode, depending on how its configured.
If the room is empty for a specified period, the display returns to Standby mode.
NOTE
The sensor can detect people through glass. Consider this when finding a location for the display (see
Installing the display on a wall on page 21). Don't position the display so that the sensor is facing a
window.

Ambient light sensor

The ambient light sensor is located in the top left corner of the display's frame.
The ambient light sensor detects the room's brightness and adjusts the brightness of the
screen accordingly.
You can enable, disable, and adjust this feature (see Appendix A: Adjusting settings on
page 57).
smarttech.com/kb/171414
The convenience panel provides buttons for turning the display on and off,
controlling the volume, freezing and unfreezing the screen, and showing
and hiding a screen shade. It also includes connectors for
and a computer or other input source.
USB peripherals
14