Ieee802.1X Mac-Based Authentication Configuration - Panasonic PN28080K Operation Manual

4.12. IEEE802.1X MAC-Based Authentication
Configuration
Configure for the IEEE802.1X MAC-based authentication function in "Global
configuration mode" and "Interface configuration mode." Display the basic
information by entering "show dot1x mac-based <port num>" in "Privileged
mode."
IEEE802.1X MAC-based authentication status display command
M24eG#
Force Authorized MAC Address configuration display command
M24eG#
Unauthorized MAC address table display command
M24eG#
EAP-Request configuration display command
M24eG#
IEEE802.1X statistic information display command
M24eG#
IEEE802.1X MAC-based authentication mode configuration command
M24eG(config-if)#
Maximum resend count configuration command
M24eG(config-if)#
Authentication operation configuration command
M24eG(config-if)#
Local re-authentication interval configuration and enable command
M24eG(config-if)#
Local re-authentication interval configuration and enable delete command
M24eG(config-if)#
Re-authentication status initialization command
M24eG(config-if)#
Re-authentication enable command
M24eG(config-if)#
Re-authentication disable command
M24eG(config-if)#
Waiting time configuration command after authentication fails
M24eG(config-if)#
Re-authentication interval configuration command
M24eG(config-if)#
Authentication server timeout configuration command
M24eG(config-if)#
Supplicant timeout configuration command
M24eG(config-if)#
Authentication request transmission interval configuration command
M24eG(config-if)#
show dot1x mac-based <port num>
show dot1x forceAuthorized-mac {all | single <MAC>}
show dot1x unauthorized mac-address-table {interface <interface>
| mac}
show dot1x eap-request port config
show dot1x statistics <port num> {since-reset | since-up}
dot1x port-auth-mode mac-based
dot1x max-req <value>
dot1x port-control {auto | force-authorized | force-unauthorized}
dot1x re-auth-timer local
no dot1x re-auth-timer local
dot1x re-authenticate
dot1x re-authentication
no dot1x re-authentication
dot1x timeout quiet-period <seconds>
dot1x timeout re-authperiod <seconds>
dot1x timeout server <seconds>
dot1x timeout supp-timeout <seconds>
dot1x timeout tx-period <seconds>
298