3. Basic Switch Configuration
3.1. System Administration Configuration
Configure the host name, installation location and contact information in
"Global configuration mode." Confirm the configuration information by
executing the "show sys-info" command in "Privileged mode."
Command to show the system information
M24eG#
Command to set the host name
M24eG(config)#
Command to delete the host name
M24eG(config)#
Command to set the installation location
M24eG(config)#
Command to delete the installation location
M24eG(config)#
Command to set the contact information
M24eG(config)#
Command to delete the contact information
M24eG(config)#
show sys-info
hostname <hostname>
no hostname
snmp-server location <server location>
no snmp-server location
snmp-server contact <server contact>
no snmp-server contact
23