Table of Contents
Advertisement
4.10. Port Group Configuration
Configure port grouping in "Global configuration mode." If a port group is
configured, ports designated as members of the port group can
communicate only among member ports in the same group. Each port can
be assigned to multiple port groups. Confirm the configuration information
by executing the "show port-group" command in "Privileged mode."
Command to show the port group information
M24eG#
Command to configure port grouping
M24eG(config)#
Command to enable port grouping
M24eG(config)#
Command to disable port grouping
M24eG(config)#
show port-group
port-group <ID> name <Name> member <Portlist>
port-group <ID> enable
no port-group <ID> enable
377
Advertisement
Table of Contents
