Appendix B. Easy Ip Address Setup Function - Panasonic PN28080K Operation Manual

Appendix B.
The following are points to note when using an easy IP address setup
function.
[Known compatible software]
Panasonic Corporation; "Easy IP Address Setup Software"
V3.01/V4.00/V4.24R00
Panasonic System Networks Co., Ltd.; "Easy Config" Ver3.10R00
Panasonic Eco Solutions Networks Co., Ltd.; "ZEQUO assist" Ver.2.1.1.1
[User-settable items]
- IP address, subnet mask and default gateway
*
- System name
*
* This item can be configured only with the software "Easy Config."
In the software, the item is displayed as "Camera name."
[Restrictions]
- The time for accepting setting changes is limited to 20 minutes after
power-on to ensure security.
However, you can change settings regardless of the time limit if the IP
address, subnet mask, default gateway, user name and password values
are the factory defaults.
* You can check the current settings because the list is displayed even
after the time limit elapses.
- The following function of the software of Panasonic System Networks Co.,
Ltd. cannot be used.
- Auto setup function
* Please contact each manufacturer for information about network
cameras.
Easy IP Address Setup Function
428