Time Configuration - Panasonic PN28080K Operation Manual

3.7. Time Configuration

Configure the time setting and time synchronization by SNTP in "Global
configuration mode." Confirm the configuration information by executing
the "show sntp" command in "Privileged mode."
Command to show the SNTP configuration
M24eG#
Command to manually set the time
M24eG(config)#
Command to enable SNTP
M24eG(config)#
Command to disable SNTP
M24eG(config)#
Command to set the SNTP server IP address
M24eG(config)#
Command to set the interval of SNTP time acquisition
M24eG(config)#
Command to enable SNTP daylight saving
M24eG(config)#
Command to disable SNTP daylight saving
M24eG(config)#
Command to set the SNTP time zone
M24eG(config)#
Command to reacquire time
M24eG(config)#
show sntp
sntp clocktime <date> <time>
sntp enable
sntp disable
sntp server <ip-address>
sntp polling-interval <min>
sntp daylight-saving
no sntp daylight-saving
sntp timezone [<location> ]
sntp update
159