Panasonic PN28080K Operation Manual page 171

<Command Entry Example>
An example of executing the command to show the ARP table
information is shown below.
M24eG> enable
M24eG# show arp sort ip
(1)
IP Address
---------------
192.168.0.100
M24eG#
Fig. 3-8-1 Example of executing the command to show the ARP table
(1) IP Address
Lists learned IP addresses in the ARP table.
(2) HWaddress
Lists learned MAC addresses in the ARP table.
(3) Type
Shows the learning type for the ARP table.
Dynamic
Static
(2) (3)
HWaddress
-----------------
00:00:00:00:00:01
information
Auto-learned address information
Information of an address registered according to
the configuration
171
Type
----------
Static