Table of Contents
Advertisement
4.6. Bandwidth Control Configuration
Configure the bandwidth control in "Interface configuration mode." Confirm
the basic information by executing the "show egress-rate-limit" command in
"Privileged mode."
Command to configure the bandwidth control
Interface configuration mode
Command to enable the bandwidth control
Interface configuration mode
Command to disable the bandwidth control
Interface configuration mode
Command to show the bandwidth control configuration
Privileged mode
egress-rate-limit [<unit(1Mbps/unit)>]
egress-rate-limit
no egress-rate-limit
show egress-rate-limit
237
Advertisement
Table of Contents
