Regal LS4C Owner's Manual page 84

Garmin Engine Monitoring Display
Typical Display Shown
A Garmin chart plotter may be installed on your
vessel. The unit displays many GPS features along
with the ability to monitor engine system functions
including engine revolutions per minute (rpm's),
GPS speed, voltage, fuel flow rate, trim, and
temperature along with tracking engine hours.
Fusion uses its own display screen on the
chartplotter for audio controls on the vessel.
Note that the Garmin and Fusion circuitry use
individual DC sources to power up the system. The
key switch does not power up these 2 systems.
1. To power up the Garmin GPS press the "on"
button located at the upper chart plotter display.
2. The function AV/Gauges,Controls will appear as
one of the choice boxes. Press the box. Another
screen with engine will appear.
3. Press the engine box and the engine gauge
displays will appear (oil pressure is engine code
driven only).
For more information refer to the Garmin manual.
84