Regal LS4C Owner's Manual page 71

Helm Systems
GLOVE BOX
STORAGE
TILT
STEERING
KNOB
SELECTED
OPTIONS
SHOWN
DC FUSE PANEL
BEHIND HELM
Helm Overview- (Typical)
The helm station may be equipped with the ability
to monitor engine functions through a single or dual
Garmin chart plotter system. Close observation of
the digital display is recommended throughout the
trip as you can split the screen to accommodate
GPS functions along with monitoring basic
engine systems including fuel usage and hours for
maintenance cycles. This works in addition to the
engine manufacturer's information panel system.
GARMIN
CHART PLOTTER
IGNITION
20 AMP IGNITION
SWITCH
BREAKER
ACCENT ENGINE
DASH LIGHT INFORMATION
SWITCH PANEL
BLOWER
BLOWER
SWITCH
WARNING LABEL
Obviously with the dual chart plotter option
another whole dimension of information monitoring
is achievable. Note that with the battery switches
in the "off" position, there is no power to the helm
and the ignition switch will not function.
All electrical features are protected by the main
battery management panel located in the sump.
Refer to earlier pages in this chapter for additional
information. Note to read and understand the
blower warning/operation information on
the bottom of the breaker switch panel.
TRIM TAB
PANEL
BREAKER PANEL
AUTOMATIC FIRE
EXTINGUISHER
GAUGE.
GAS VAPOR
DETECTOR
REMOTE
CONTROL
SAFETY
LANYARD
71