Regal LS4C Owner's Manual page 141

Captain's Chair-Bucket Seat
LEANING SAFETY
POST LANYARD
The bucket seat features handle devices that operate
multiple seat modes. The separate handles when
properly locked, prevent the seat from rotating and
sliding fore and aft during operation of the vessel.
This provides an operator safety margin. Never alter
the seat slider mechanism and lubricate per the
slider manufacturers recommendations.
To adjust the seat slider follow the instructions and
refer to the illustration on this page:
1. To adjust fore and aft movement, pull up on handle
"A", slide seat to desired location and release the
handle. The slide will lock in the closest detent
position.
2. To rotate the seat and adjust the friction control
pull handle "B" up to the horizontal position. The
seat is now ready to rotate to the desired position.
TYPICAL SEAT SLIDER
To increase the rotation friction, turn handle "C"
clockwise to desired resistance. To decrease the
rotation friction, turn handle "C" counterclockwise.
3. To lock the rotational feature, push handle "B"
down and the positive lock feature looks for the
next detent position.
Note to always use the positive lock feature when your
vessel is underway. For further information contact the
closest Regal dealer.
Note that it is the captain's responsibility when making
headway to securely attach the safety lanyard and
shall make sure all passengers are in designated seats
and PFD's are worn by everyone aboard.
141