Regal LS4C Owner's Manual page 143

Table-Teak (Typical)
If installed the teak bow table is found in a cockpit
locker. The table features teak a hardwood known
for beauty and durability in the harsh marine
environment.
1
2
BASE
3
ROD
Setting Up Table
1. Remove the table from the cockpit storage area.
You will need to move the cooler for table access.
Unsnap the holding strap and pull out the table.
2. Locate the table leg under the starboard cockpit
seat. Unfasten it from the 2 hold down clamps.
Insert the leg into a table holder. Note that the
table leg features 4 cut outs at the top.
3. The table base features an alignment rod through
the top of the base as shown.
4. The table must be inserted down into one of the
two sets of holes depending on how the table fits
the seating arrangement. The rod when attached to
the table will prevent the table from turning while in
use. Ensure that the table is down completely into
the rod.
5. To disassemble the table reverse the process.
4
Note that it is recommended that the table assembly
be stored before making a cruise due to possible
rough seas or other adverse weather conditions.
143