Blackfly S Physical Interface; Blackfly S Physical Description - FLIR BLACKFLY S USB Vision Installation Manual

6 Blackfly S Physical Interface
6.1 Blackfly S Physical Description
1. Lens holder (C-mount)
See Lens Mounting
2. Glass/IR filter system
See Dust Protection
Off Filters
3. M2x2.5 mounting holes
See Mounting
Mounting Bracket
4. General purpose I/O connector
See General
(GPIO)
5/4/2017
©2015-2017 FLIR
Integrated Imaging
Solutions Inc.
All rights reserved.
and Infrared Cut-
with the Case or
Purpose Input/Output
FLIR Blackfly
GigE
5. Status LED
See Status Indicator LED
6. Interface connector
See Interface Connector
7. M2x2.5 mounting holes
8. M3x2.5 mounting holes
See Mounting with the Case or Mounting Bracket
9. Camera label
Contains camera information such as model name,
serial number and required compliance.
®
S Installation Guide
6 Blackfly S Physical Interface
USB3
16