Table of Contents
Advertisement
Related Knowledge Base Articles
USB 3.1 Frequently Asked Questions
6.4
Interface Cables
To purchase a recommended cable from FLIR, visit the
For GigE cameras—Category 5e or 6 cables up to 100 meters in length should be used for connecting the camera
to the network interface card on the host system. FLIR sells a 5-meter Category 5e cable for this purpose.
For USB3 cameras—The USB 3.0 standard does not specify a maximum cable length.
3-meter USB 3.0 cable
n
5-meter USB 3.0 cable
n
5-meter USB 3.0 cable high performance
n
Related Knowledge Base Articles
Extending the Working Distance of
6.5
Interface Card
To purchase a compatible card from FLIR, visit the
5/4/2017
©2015-2017 FLIR
Integrated Imaging
Solutions Inc.
All rights reserved.
Note: When the camera is connected to a USB 2.0 interface, it
runs at USB 2.0 speed, and maximum frame rates are adjusted
accordingly based on current imaging parameters.
Title
Note: For optimal ESD protection, we recommend using a
shielded Ethernet cable or connecting the camera housing to
chassis ground (earth).
(Part Number
ACC-01-2300)
(Part Number
ACC-01-2301)
Note: A 5-meter cable (or longer) is not recommended for
laptops or on board controllers.
Title
USB 3.0 Cameras
FLIR Blackfly
Article
Knowledge Base Article 10019
Products Accessories
(Part Number
ACC-01-2302)
Article
Technical Application Note 10341
Products Accessories
page.
®
S Installation Guide
6 Blackfly S Physical Interface
page.
20
Hide quick links:
Advertisement
Table of Contents
