Power Interface; Camera Link ® Video Output - FLIR X-Series User Manual

6.2.8 Power Interface

A 24VDC external AC-DC power converter is provided with the X-Series camera
systems as a standard accessory. Power supply specifications are:
AC Input voltage range: 100-250VAC 50/60Hz
Current draw: 24 VDC at up to 4.0 amps input to the camera
Converter dimensions: 6.25 inches x 3.5 inches x 2.75 inch (L x W x H)
Converter weight: approximately 1 lb.
When using your own DC power supply, you should take note of the following
information:
Input voltage range: 24 volts DC nominal, 20-28V range
Current draw: 1.4 amps nominal steady state, 2.6 amps peak (during cool down)
X-Series camera power dissipation is <50 Watts steady state at nominal ambient
temperature.
Mating Connector: Fisher Connectors, S103A052-130+E31 103.1/5.7 +B. (FLIR PN
26399-000). The power cable should be 20AWG (stranded 10/30), 3 conductors, no
shield, max diameter of 0.223 inches. (Example: Alphawire PN 882003)
6.2.9 Camera Link
X-series User's Manual
X-Series Camera Power Input Pinouts
®
Video Output
Camera Link® is a standard data interface for high end visible and IR
cameras. The X-Series cameras use a Camera Link® Full interface in a 4-
tap, 16-bit configuration, at 85Mhz. In terms of ports, the A and B ports
are used with bit A0 being the LSB and bit B7 being the MSB of the data
transferred. The header row uses the entire 16-bit value while the pixel
data has a 14-bit range with the upper MSB's masked to "0".
Frame Valid
Line Valid Header Row
Data Valid
Row 1 Row 2
6 – Interfaces
Row N
75