Table of Contents
Advertisement
6.10 Non-Volatile Flash Memory
The camera has 6 MB non-volatile memory for users to store data.
Related Knowledge Base Articles
Storing data in on-camera flash
6.11
Dust Protection
The camera housing is designed to prevent dust from falling directly onto the sensor's protective glass surface.
This is achieved by placing a piece of clear glass (monochrome camera models) or an IR cut- off filter (color
models) that sits above the surface of the sensor's glass. A removable plastic retainer keeps this glass/filter
system in place. By increasing the distance between the imaging surface and the location of the potential dust
particles, the likelihood of interference from the dust (assuming non-collimated light) and the possibility of damage
to the sensor during cleaning is reduced.
Related Knowledge Base Articles
Removing the IR filter from a color
Selecting a lens for your camera
5/4/2017
©2015-2017 FLIR
Integrated Imaging
Solutions Inc.
All rights reserved.
Title
memory
Warning! Cameras are sealed when they are shipped. To avoid
contamination, seals should not be broken until cameras are
ready for assembly on site.
Warning! Use caution when removing the protective glass or
filter. Damage to any component of the optical path voids the
Hardware Warranty. Removing the protective glass or filter alters
the optical path of the camera, and may result in problems
obtaining proper focus with your lens.
Title
camera
FLIR Blackfly
Article
Knowledge Base Article 10370
Article
Knowledge Base Article 10080
Technical Application Note 10694
®
S Installation Guide
6 Blackfly S Physical Interface
26
Hide quick links:
Advertisement
Table of Contents
