Table of Contents
Advertisement
The camera must connect to an interface card. This is sometimes called a host adapter, a bus controller, or a
network interface card (NIC).
For GigE cameras— A 1000 BASE- T NIC is recommended for streaming images on the Ethernet network
between the camera and host system.
For USB3 cameras—In order to achieve the maximum benefits of USB 3.0, the camera must connect to a
USB 3.0 PCIe 2.0 card. The card must be connected to the PC power supply in order to power the camera through
the USB 3.0 interface.
6.6
General Purpose Input/Output (GPIO)
The camera is equipped with a 6-pin GPIO connector on the back of the case. The connector is a Hirose HR10A-
7R-6PB, the mating connector is a Hirose HR10A-7P-6S(73).
5/4/2017
©2015-2017 FLIR
Integrated Imaging
Solutions Inc.
All rights reserved.
Note: For optimal video streaming and camera control
performance, we recommend an Intel Pro chipset on a PCIe
interface.
FLIR Blackfly
6 Blackfly S Physical Interface
®
S Installation Guide
21
Hide quick links:
Advertisement
Table of Contents
