Oryx Physical Interface; Oryx Physical Description - FLIR ORYX R Installation Manual

6

Oryx Physical Interface

6.1

Oryx Physical Description

1. Lens holder
See Lens Mounting
2. Glass/IR filter system
See Dust Protection
3. M4.OXO.7 mounting holes (x16)
See Mounting Your Oryx
4. General purpose I/O connector
See General Purpose Input/Output (GPIO)
4/9/2020
©2015-2020 FLIR
Integrated Imaging
Solutions Inc.
All rights reserved.
and Infrared Cut-Off Filters
FLIR Oryx
5. Status LED
See Status Indicator LED
6. Interface connector
See Interface Connector
7. Camera label
Contains camera information such as model
name, serial number and required compliance.
8. 1/4-20 mounting hole
(standard and large case only)
See Mounting Your Oryx
®
Installation Guide
6 Oryx Physical Interface
14