Table of Contents
Advertisement
3
Blackfly S Installation
3.1
Preparing for Installation
What system configuration is recommended?
Recommended
System
Configuration
Do you have all the parts you need?
To install your camera you will need the following components:
For GigE cameras—Ethernet cable (see
n
injector (if using PoE)
For USB3 cameras—USB 3.0 cable (see
n
6-pin GPIO cable (see
n
C-mount Lens (see
n
Tripod adapter (optional) (see
n
Interface card (see
n
FLIR sells a number of the additional parts required for installation. To purchase, visit the
Do you have a downloads account?
The
downloads
page has many resources to help you operate your camera effectively, including:
Spinnaker
n
Firmware updates and release notes
n
Dimensional drawings and CAD models
n
Documentation
n
To access the software and firmware downloads you must have a downloads account.
5/4/2017
©2015-2017 FLIR
Integrated Imaging
Solutions Inc.
All rights reserved.
Operating
CPU
System
Windows 7,
Windows 8, or
Intel i5
Windows 10
(32- or 64-bit)
Note: Refer to
Technical Application Note 10359
information on recommended USB 3.0 system components.
General Purpose Input/Output
Lens Mounting
)
Mounting with the Case or Mounting
Interface
Card)
®
SDK software, including drivers (required for installation)
RAM
Ports
Intel USB3
4 GB
host controller
Interface
Cables) and Powered Ethernet switch or Ethernet power
Interface
Cables)
(GPIO))
®
FLIR Blackfly
S Installation Guide
3 Blackfly S Installation
Software to run and
compile example code
Microsoft Visual Studio 2010,
Visual Studio 2013, or
Visual Studio 2015
for important
Bracket)
Accessories
page.
3
Hide quick links:
Advertisement
Table of Contents
