Interface Connector; Ethernet Connector; Usb 3.1 Connector - FLIR BLACKFLY S USB Vision Installation Manual

6.3

Interface Connector

6.3.1

Ethernet Connector

The 8-pin RJ-45 Ethernet jack is equipped with two (2) M2 screwholes for secure connection. Pin assignments
conform to the Ethernet standard.
Power over Ethernet (PoE)
To use PoE, an Ethernet power injector or a powered Ethernet switch must be connected to the camera. The PoE
conforms to the IEEE 802.3af-2003 standard.
6.3.2 USB 3.1 Connector
The camera is equipped with a USB 3.1 Micro-B connector that is used for data transmission, camera control and
power. For
http://www.usb.org/developers/docs/.
The USB 3.1 Micro- B receptacle accepts a USB 2.0 Micro- B plug and, therefore, the camera is backward
compatible with the USB 2.0 interface.
5/4/2017
©2015-2017 FLIR
Integrated Imaging
Solutions Inc.
All rights reserved.
more detailed information,
USB 3.1 Micro B Connector
USB 3.1 Micro-B Connector Pin Assignments
Pin Signal Name
1
VBUS
2 D-
3 D+
4 ID
5 GND
6 MicB_SSTX-
7 MicB_SSTX+
8 GND_DRAIN
9
MicB_SSRX-
10
MicB_SSRX+
consult the USB
Description
USB 2.0 differential pair
OTG identification
Ground for power return
SuperSpeed transmitter differential pair
Ground for SuperSpeed signal return
SuperSpeed receiver differential pair
®
FLIR Blackfly S Installation Guide
6 Blackfly S Physical Interface
3.1 specification available
Power
from
19