Vacon NX Active Front End User Manual page 94

vacon • 92
Timeout time
90 s
Default page
NOTE! If the
Contrast adjustment (P6.6.4)
In case the display is unclear, you can adjust it's contrast through the same procedure as for the
timeout time setting, see Timeout time (P6.6.3).
Backlight time (P6.6.5)
By giving a value for the
going out. You can select any time between 1 and 65535 minutes or 'Forever'. For the value setting
procedure, see Timeout time (P6.6.3).
6
READY
Timeout time
90 s.
Figure 69. Timeout time setting
Timeout time
value is 0 the
Backlight time
, you can determine how long the backlight stays on before
READY
Timeout time
60 s.
setting has no effect.
Tel. +358 (0) 201 2121 • Fax +358 (0)201 212 205
Control Keypad
READY
CONFIRM CHANGE
enter
CANCEL
11196.emf