Vacon NX Active Front End User Manual page 89

Control Keypad
READY
Parameter sets
Select
READY
Parameter sets
Wait...
Upload parameters to keypad (To keypad, S6.3.2)
This function uploads all existing parameter groups to the keypad provided that the drive is stopped.
Enter the To keypad page (S6.3.2) from the Parameter copy menu. Pressing
takes you to the edit mode. Use the
the Enter button . Wait until 'OK' appears on the display.
READY
Copy Parameters
P4

P1
READY
Up to keypad
Wait...
Download parameters to drive (From keypad, S6.3.3)
This function downloads one or all parameter groups uploaded to the keypad to a drive provided
that the drive is in STOP status.
Enter the To keypad page (S6.3.2) from the Parameter copy menu. Pressing the
takes you to the edit mode. Use the
parameters or Application parameters
display.
The procedure to download the parameters from keypad to Active Front End is similar to that of
from Active Front End to keypad. See Figure 60.
24-hour support +358 (0)201 212 575 • Email: vacon@vacon.com
Parameter sets
LoadFactDef
Parameter sets
OK
Figure 60. Storing and loading of parameter sets
Browser buttons
READY
Up to keypad
Select
READY
Up to keypad
OK
Figure 61. Parameter copy to keypad
Browser buttons
and press the
READY
READY
All parameters
to select the option
READY
Up to keypad
All param.
All parameters, All but motor
to select either
Enter button . Wait until 'OK' appears on the
vacon • 87
enter
CONFIRM
CANCEL
11198.emf
Menu button right
and press
CONFIRM
enter
C HAN GE VALUE
C ANC EL
11199.emf
Menu button right
6