Vacon NX Active Front End User Manual page 86

vacon • 84
I/Oterm
Fault history
H1 
6.3.8 System menu (M6)
You can enter the System menu from the Main menu by pressing
location indication M6 is visible on the first line of the keypad display
The controls associated with the general use of the Active Front End, such as application selection,
customised parameter sets or information about the hardware and software are located under the
System menu. The number of submenus and subpages is shown with the symbol S (or P) on the
value line.
The System menu functions are presented in the Table 29.
System menu functions
Code
S6.1 Selection of language
S6.2 Application selection
S6.3 Copy parameters
S6.3.1 Parameter sets
S6.3.2 Load to keypad
S6.3.3 Load from keypad
6
5 ChargeSwitch
READY
11 Output phase
H3
PUSH
Figure 58. Fault history menu
Table 29. System menu functions
Function Min
I/O term
READY
I/Oterm
T1  T7
to reset
enter
Max Unit Default
English
Active Front
End
application
Tel. +358 (0) 201 2121 • Fax +358 (0)201 212 205
Control Keypad
I/O ter m
Operation hours
13:25:43
READY
I/Oterm
Operation days
17
11200.emf
Menu button right when the
.
Selections
English
Deutsch
Suomi
Svenska
Italiano
Load factory defaults
Store set 1
Load set 1
Store set 2
Load set 2
All parameters
All parameters
All but motor parameters
Application parameters