Eu Directive; Ce Marking; Emc Directive; Introduction - Vacon NX Active Front End User Manual

EU Directive

2. EU D
IRECTIVE
2.1

CE marking

The CE marking on the product guarantees the free movement of the product within the EEA
(European Economic Area). It also guarantees that the product complies with applicable directives
(for example, the EMC Directive and other possible so-called new method directives). Vacon
Active Front End carries the CE label as a proof of compliance with the Low Voltage Directive (LVD),
Electro Magnetic Compatibility (EMC) Directive and RoHS Directive. SGS FIMKO has acted as the
Notified Body.
2.2

EMC directive

2.2.1

Introduction

The EMC Directive provides that the electrical apparatus must not excessively disturb the
environment it is used in, and, on the other hand, it shall have an adequate level of immunity toward
other disturbances from the same environment.
The compliance of Vacon
Construction Files (TCF) and checked and approved by SGS FIMKO, which is a Notified Body. The
Technical Construction Files are used to authenticate the conformity of Vacon NX Active Front End
with the Directive because it is impossible to test such a large product family in a laboratory
environment and because the combinations of installation vary greatly.
2.2.2

Technical criteria

Our basic idea was to develop a range of Vacon
usability and cost efficiency. EMC compliance was a major consideration from the outset of the
design.
2.2.3

Vacon Active Front End EMC classification

Factory delivered Vacon
immunity requirements (standard EN 61800-3).
Class T:
Class T equipment have a small earth leaking current and can be used with floating DC input.
2.2.4

Manufacturer's declaration of conformity

The following page presents the photocopy of the Manufacturer's Declaration of Conformity
assuring the compliance of Vacon
24-hour support +358 (0)201 212 575 • Email: vacon@vacon.com
®
NX Active Front End with the EMC Directive is verified with Technical
®
®
NX Active Front End are Class T equipment, which fulfills all EMC
®
NX Active Front End with the EMC-directives.
NX Active Front End offering the best possible
vacon • 7
®
NX
2