Vacon NX Active Front End User Manual page 91

Control Keypad
6.3.8.4 Safety
NOTE! The Security submenu (S6.5) is protected with a password. Store the password in a safe
place!
Password (S6.5.1)
The application selection can be protected against unauthorised changes with the Password
function (S6.5.1).
By default, the password function is not in use. If you want to activate the function, enter the edit
Menu button right
mode by pressing
password with the Browser buttons
NOTE! that you can also set the password by digits. In the edit mode, push
and Timeout time (P6.6.3) another zero appears on the display. Set ones first. To set the tens, press
Menu button right , and so on. Confirm the password with the
wait until the Timeout time (P6.6.3) (see Timeout time (P6.6.3) has expired before the password
function is activated.
If you try to change applications or the password itself, you will be prompted for the current
password. Enter the password with the
You can deactivate the password function by entering the value 0.
READY
I/O term
Password
Not in use
NOTE! Store the password in a safe place! No changes can be made unless a valid password is
entered.
Parameter lock (P6.5.2)
This function allows the user to prohibit changes to the parameters.
If the parameter lock is activated, the text
parameter value.
NOTE! This function does not prevent unauthorised editing of parameter values.
Enter the edit mode by pressing
parameter lock status. Confirm the change with the
pressing Menu button left.
24-hour support +358 (0)201 212 575 • Email: vacon@vacon.com
. A blinking zero appears in the display and you can set a
. The password can be any number between 1 and 65535.
Browser buttons
READY
I/O term
Password
0
Figure 63. Password setting
*locked* will appear on the display if you try to edit a
Menu button right.
Use the
Enter button
Menu button right
Enter button . After this, you have to
.
READY
I/O term
enter
Password
OR:
00
Browser buttons
or go back to the previous level by
vacon • 89
again
enter
11190.emf
to change the
6