Vacon NX Active Front End User Manual page 92

vacon • 90
I/O term
System Menu
S1 
I/O term
Parameter Lock
ChangeEnable
Start-up wizard (P6.5.3)
The Start-up wizard facilitates the commissioning of Vacon
Start-up wizard prompts the operator for the language and application of his/her choice and then
displays the first menu or page.
Activating the Start-up wizard: In the System Menu, find page P6.5.3. Press
to enter the edit mode. Use the
Enter button
. If you want to deactivate the function, follow the same procedure and give the
parameter value
I/O term
Startup wizard
No
Multimonitoring items (P6.5.4)
Vacon NX alphanumeric keypad features a display where you can monitor up to three actual values
at the same time (see Chapter 6.3.1 and Chapter Monitoring values in the manual of the application
you are using). On page P6.5.4 of the System Menu, you can define whether the operator can replace
the values monitored with other values. See Figure 66.
I/Oterm
Multimon. items
ChangeEnable
6
READY
Security
S9
READY
Parameter Lock
enter
ChangeDisabl
Figure 64. Parameter locking
Browser buttons
No .
READY
I/O term
Startup wizard
No
Figure 65. Activation of Start-up wizard
READ Y
I/Oterm
Multimon. items
ChangeEnable
Figure 66. Disabling the change of multimonitoring items
READY
I/O term

P1 P4
READY
I/O term
®
NX Active Front End. If active, the
Yes
to select and confirm the selection with the
READY
I/O term
Startup wizard
Yes
READ Y
enter
Tel. +358 (0) 201 2121 • Fax +358 (0)201 212 205
Control Keypad
READY
I/O term
Parameter Lock
ChangeEnable
11191.emf
Menu button right
READY
enter
CONFIRM
CANCEL
11192.emf
READ Y
I/Oterm
Multimon. items
ChangeDisable
11193.emf
once