Installation; Initial Inspection; Certification - Keysight 85024A User's And Service Manual

3

Installation

Initial Inspection

If the shipping container or cushioning material is damaged, keep it until the
contents of the shipment are checked for completeness, and the product is
checked both mechanically and electrically. Procedures for checking the electrical
performance are given in
Notify the nearest Keysight Technologies office if the product does not pass
performance tests, the shipping contents are incomplete, or if there is mechanical
damage or defect. Notify the carrier if the shipping container is damaged or if the
cushioning material shows signs of stress. Keep all shipping materials for the
carrier's inspection. Keysight Technologies will arrange for repair or replacement
without waiting for a claim settlement.

Certification

Keysight Technologies certifies that this product met its published specifications
at the time of shipment from the factory. Keysight further certifies that its
calibration measurements are traceable to the United States National Institute of
Standards and Technology (NIST, formerly NBC), to the extent allowed by the
institute's calibration facility, and to the calibration facilities of other International
Standards Organization members.
28
Chapter 5, "Performance
Keysight 85024A User's and Service Guide
Tests".