Replaceable Parts - Keysight 85024A User's And Service Manual

2 Accessories

Replaceable parts

If the tip is discolored, bent or broken, it must be replaced. Follow the procedure
outlined in
Figure 2-2
Replacing the probe tip
1 Remove the 10:1 divider from the probe.
2 Unscrew the damaged tip with a 3/32 nut driver supplied with the probe and
3 Screw on the new tip and lightly tighten it with a 3/32 inch nut driver.
26
Replacing the probe tip
Item Description
1 Short probe tip
Long probe tip
2 Guide
Exploded view of 10:1 divider
discard the tip.
(Over-tightening the tip can damage the nose assembly.)
below.
Part number
85024-60015
85024-60016
11881-20007
Keysight 85024A User's and Service Guide