Service Miscellaneous - Scotts S2048, S2554 Operator's Manual

Checking Tire Pressure
CAUTION: Explosive separation of a tire and
rim parts can cause serious injury or death:
- Do not attempt to mount a tire without the
proper equipment and experience to perform
the job.
- Always maintain the correct tire pressure.
Do not inflate the tires above the
recommended pressure. Never weld or heat a
wheel and tire assembly. The heat can cause
an increase in air pressure resulting in a tire
explosion. Welding can structurally weaken or
deform the wheel.
- When inflating tires, use a clip-on chuck and
extension hose long enough to allow you to
stand to one side and NOT in front of or over
the tire assembly.
- Check tires for low pressure, cuts, bubbles,
damaged rims or missing lug bolts and nuts.
1. Check tires for damage.
2. Check tire pressure with an accurate gauge.
3. Add or remove air, if necessary:
Tire Size
Model S2048:
Front = 16 x 6.5 x 8
Rear = 23 x 9.50 x 12
Models S2554:
Front = 16 x 7.5 x 8
Rear = 24 x 12 x 12

SERVICE MISCELLANEOUS

Pressure
97 kPa (14 psi)
83 kPa (12 psi)
83 kPa (12 psi)
69 kPa (10 psi)
Service Miscellaneous - Page 54